TC-2013L Gantry Milling Machine

The TC-2013L Gantry CNC Milling Machine for sale, for a variety of industries. For a variety of machining needs, including high-speed and heavy-duty, TAICNC complete line of Gantry Milling Machine delivers lasting performance. Due to a vibration- Dampening Meehanite cast iron base and large precision spindle bearings, we offer shops increased precision while sustaining higher load capacities. Every Gantry Machining Center features fully-equipped top-notch CNC controls for maximum machining capabilities.

SEND INQUIRY

You can make an inquiry about this product.
Your e-mail will not be leaked.

PRODUCT DETAIL
PRODUCT SPECIFICATIONS
ACESSORIES

>the TC-2013L Gantry CNC Milling Machine uses the best casting materials

TC-2013L Gantry CNC Milling Machine the major structural parts are manufactured from high-quality Meehanite cast iron (HT300A+)

the base is mounted with high precision linear ways with high feed rate, allowing the machine to perform high-speed cutting.

Reinforced column base greatly increases structural strength.

the TC-2013L Gantry CNC Milling Machine Best Possible Structural Design

The TC-2013L Gantry CNC Milling Machine is designed to be new and more mechanical, improving the overall performance of the machine and increasing machine life.

The column on the TAICNC Machining center is carefully analyzed and designed for increased rigidity.

The column base if reinforced to increase structural strength and rigidity.with this special design, the machine will exhibit ultra-high stability during high-speed operations.

TC-2013B Gantry CNC Milling Machine uses the Rigid Roller Guide

TC-2013L Gantry CNC Milling Machine adopts rigid roller guide TC-2013L Gantry CNC Milling Machine. All 3 axes are equipped with rigid roller guide and ball screw. The 3-axis rapid moving speed can reach 15m / min.

TC-2013L Gantry CNC Milling Machine the box type constructed base is mounted with 4 linear ways, making the machine capable of resisting heavy loads, additional benefits are its increased feed rate and higher positioning accuracy.

High-efficiency automatic tool changer

24-bit Tool arm type magazine, Bi-directional, random tool selection, the innovative design of the magazine changer reduces tool change time to 2 seconds, You can also select the spindle and automatic tool changer BT50

Belt type high rigidity spindle

The TC-2013L Gantry CNC Milling Machine uses a belt-type high-rigidity spindle with a maximum speed of 10,000 rpm for more rigid product processing，You can also select the spindle and automatic tool changer BT50

have variety CNC controllers such

There are various CNC controller options, such as the mature German SIEMENS CNC controller on the market. Japan FANUC CNC controller, Taiwan SYSTEM CNC controller

the TC-2013L Gantry CNC Milling Machine Best quality management

The best quality management, each CNC machine has undergone rigorous testing.

A sophisticated laser unit is employed to inspect the three-axis accuracy.

Including linear positioning, positioning, accuracy, pitch error, and backlash, etc.

use a ball bar tester is employed for inspecting servo accuracy, static and dynamic geometric errors.

PRODUCT SPECIFICATIONS

Items	Unit	TC-2013L
Travel
X axis	mm	2000
Y axis	mm	1300
Z axis	mm	600
Distance from spindle nose to table	mm	140-740
Distance from spindle center to Z-axis guide-way	mm	500
Table
Dimension	mm	2300 X 1000
Max. table load	kg	2000
T-slot （widthpitchnumber）	mm	18 X 140 X 5
Spindle
Spindle type	-	Belt
Spindle speed	rpm	10000
Spindle motor power （cont./30 min rated）	kW	11
Spindle taper	-	BT40
Feed Rate
Rapid traverse（X/Y/Z）	m/min	15 / 15 / 15
Cutting feed rate	mm/min	1-10000
Motor power （X/Y/Z）	kW	3 / 3 / 3
ATC
ATC type	-	Arm type
Magazine capacity	pcs	24
Max. tool diameter (adjacent pocket empty)	mm	85 / 120
Max. tool length	mm	350
Max. tool weight	kg	7
Tool shank	-	BT 40
Space & System Requirement
Pneumatic pressure	kgf/cm²	6
Machine net weight	kg	13000
Max. floor space （WxLxH）	mm	4800 X 2300 X 3200

ACESSORIES

A. Standard Accessories		B. Optional Accessories
1.	SIEMENS 808D controller	1.	FANUC 0iMF controller
2.	10000rpm, BT40, Belt Type	2.	8000rpm, BT40,Belt Type
3.	24 tools, BT40, Arm type	3.	MITSUBISHI M80A controller
4.	Spindle air blast	4.	SYNTEC 21MA controller
5.	Cutting air blast	5.	4th axis rotary table
6.	Spindle oil cooler	6.	5th axis rotary table
7.	Cutting the coolant system	7.	Chain type chip conveyor
8.	Automatic centralized lubrication system	8.	6000rpm, BT50, Belt Type
9.	Chip auger with lift up exhaust tube	9.	24 tools, BT50, Arm type
	Working light	10.
11.	Indication tower light	11.
12.	Coolant gun & air gun	12.
13.	Coolant flushing system	13.
14.	Coolant tank	14.
15.	Manual pulse generator ( MPG )	15.
16.	Ethernet & RS-232C interface	16.
17.	Heat exchanger for electrical cabinet	17.
18.	Tool kits	18.
19.	Leveling bolts & pads	19.
20.	Operation manuals
21.	One-year machine warranty (Spindle warranty upon spindle manufacturer)
22.	Controller warranty (Controller warranty upon controller manufacturer)