Webcome to Professional machining center manufacturer

TC-650L Small CNC Machining Center

TAICNC small CNC machining center is high accuracy with a high rigidity spindle to provide powerful cutting capabilities. has a superior structural design and high reliability. this series Vertical CNC Machine Center With the largest machining range in its class, also affordable cost. A unique feature of this machine is the spindle torque and horsepower compared to other small footprint machines. is able to provide a solution for the aerospace, medical, defense, 3C, automotive and other industries requiring high-value, complex parts from difficult to machine materials.


You can make an inquiry about this product.
Your e-mail will not be leaked.

>the small CNC machining center
uses the best casting materials

small CNC machining center the major structural parts are manufactured from high-quality Meehanite cast iron (HT300A+)

the base is mounted with high precision linear ways with high feed rate, allowing the machine to perform high-speed cutting.

Reinforced column base greatly increases structural strength.

The best casting material

the small CNC machining center
The Best Possible Structural Design

The TC-650L small CNC machining center is designed to be new and more mechanical, improving the overall performance of the machine and increasing machine life.

The column on the TAICNC Machining center is carefully analyzed and designed for increased rigidity.

The column base if reinforced to increase structural strength and rigidity.with this special design, the machine will exhibit ultra-high stability during high-speed operations.

small CNC machining center

small CNC machining center uses High-speed linear guide

All of 3 axes are equipped with high-precision ball-type linear guideways and a ball screw,3 axes rapid traverse speed can reach 36m / min.

The box type constructed base is mounted with 4 linear ways, making the machine capable of resisting heavy loads, additional benefits are its increased feed rate and higher positioning accuracy.

High speed linear guide

High-efficiency automatic tool changer

16-bit Tool arm type magazine, Bi-directional, random tool selection, the innovative design of the magazine changer reduces tool change time to 2 seconds

High efficiency automatic tool changer

Belt type high rigidity spindle

The TC-550L small vertical machining center uses a belt-type high-rigidity spindle with a maximum speed of 10,000 rpm for more rigid product processing.

High rigidity spindle

have variety CNC controllers such

There are various CNC controller options, such as the mature German SIEMENS CNC controller on the market. Japan FANUC CNC controller, Taiwan SYSTEM CNC controller

Mature industrial control system


small CNC machining center Best quality management

The best quality management, each CNC machine has undergone rigorous testing.

A sophisticated laser unit is employed to inspect the three-axis accuracy.

Including linear positioning, positioning, accuracy, pitch error, and backlash, etc.

use a ball bar tester is employed for inspecting servo accuracy, static and dynamic geometric errors.

Best quality management


Items Unit TC-650L
X axis mm 650
Y axis mm 400
Z axis mm 500
Distance from spindle nose to table mm 100-600
Distance from spindle center to Z-axis guide-way mm 476
Dimension mm 800 X 400
Max. table load kg 350
T-slot (width*pitch*number) mm 18 X 125 X 3
Spindle type - Belt
Spindle speed rpm 10000
Spindle motor power (cont./30 min rated) kW 5.5
Spindle taper - BT40
Feed Rate
Rapid traverse(X/Y/Z) m/min 36 / 36 / 36
Cutting feed rate mm/min 1-10000
Motor power (X/Y/Z) kW 1.8 / 1.8 / 1.8
ATC type - Arm type
Magazine capacity pcs 16
Max. tool diameter (adjacent pocket empty) mm 85 / 120
Max. tool length mm 350
Max. tool weight kg 7
Tool shank - BT 40
Space & System Requirement
Pneumatic pressure kgf/cm² 6
Machine net weight kg 3800
Max. floor space (WxLxH) mm 2300 X 1900 X 2300


A. Standard Accessories B. Optional Accessories
1. SYNTEC 21MA controller 1. FANUC 0iMF controller
2. 10000rpm, BT40, Belt Type 2. 8000rpm, BT40,Belt Type
3. 16 tools, BT40, Arm type 3. MITSUBISHI M80A  controller
4. Spindle air blast 4. SIEMENS 808D  controller
5. Cutting air blast 5. 4th axis rotary table
6. Spindle oil cooler 6. 5th axis rotary table
7. Cutting the coolant system 7. Chain type chip conveyor
8. Automatic centralized lubrication system 8.
9. Chip auger with lift up exhaust tube 9.
Working light 10.
11. Indication tower light 11.
12. Coolant gun & air gun 12.
13. Coolant flushing system 13.
14. Coolant tank 14.
15. Manual pulse generator ( MPG ) 15.
16. Ethernet & RS-232C interface 16.
17. Heat exchanger for electrical cabinet 17.
18. Tool kits 18.
19. Leveling bolts & pads 19.
20. Operation manuals
21. One-year machine warranty

(Spindle warranty upon spindle manufacturer)

22. Controller warranty

(Controller warranty upon controller manufacturer)

Our Advantage



We have 18 years experience in CNC machine tool production and provide a variety of CNC machine tools.



Has advanced leading production facilities such as the pentahedron gantry machining center and guide rail grinding machines.



Has advanced international coordinate measuring instruments, laser interferometers, ball bar and other high-precision testing equipment.