>SCK-36CY oblique bed turning and milling CNC machine tool is a row knife CNC lathe, at the same time has milling function.
Its main parts are made of high-quality Meehanite cast iron and can relieve the pressure after tempering.
The use of a strong base with scientific ribs to strengthen, in the turn has maximum stability.
The surface of the ultra-wide box channel on the X-axis and Z-axis of the machine tool is hardened and precision ground.
The 45 inclined bed design provides very strong support for the turret and increases chip removal efficiency.
In addition, we have several other models to choose from.
Please take a closer look at the details.
Slant Bed Turning and Milling CNC Machine video
SCK series Slant Bed Turning and Milling CNC Machine is a high-speed precision CNC machine developed by TAICNC.
It uses a 2-axis linear guideway structure, it has both turning and milling functions, the following is a demonstration video of Slant Bed Turning and Milling CNC Machine.
Same type of product
There are several models of SCK series CNC lathes to choose from, you can visit our catalogue to see more models of CNC lathes.
All structural parts are manufactured from high quality stress relieved Meehanite cast iron, to minimize deformation.
Massive base construction ensures high rigidity and excellent vibration dampening.
Features box ways on X, Z axis. All surfaces are hardened and precision ground.
With oversized box-ways on both ensures maximum stability and efficiency even under heavy cutting loads. All box-ways are precision ground and heat treated for an optimal surface finish.
Hydraulic Turrets and Power Heads
The machine tool is equipped with hydraulic turret and 3-axis power head, the maximum tool quantity is 4-6PCS, the tool replacement time is 0.5 seconds, and has two functions of turning and milling at the same time. One clamping can complete the machining of parts.
High speed spindle
Slant bed CNC lathe Machine Features a high precision spindle that accommodates both collet chucks and 3-jaw hydraulic chucks for versatile machining options. The spindle features a double row of roller bearings combined with angular contact ball bearings that resist radial and axial loads. With spindle speeds up to 4000rpm, fast and efficient machining is guaranteed, as well as very fine workpiece finishing.
Precision Three-Grip Chuck
The SCK series CNC lathe is equipped with a high precision three-claw chuck, which enables it to maintain higher stability and precision when rotating at high speed. it is the best combination with the precision spindle.
High precision roller screw
precision roller screw with is a very important part of Slant bed CNC lathe. It affects the accuracy of machine tools. This machine uses C3 grade high precision ball screw with pre-extension process, improve the transmission rigidity and machine accuracy.
Precisions ballscrews are made through a grinding process of the screw spindle. Precision ground ballscrews provide high positioning accuracy and repeatability, smooth movement and long service life. These highly efficient ballscrews are a perfect solution for a variety of applications.
Precision linear guide
The CNC turning center of SCK series inclined bed adopts the structure of 2-axis linear guideway, which has the characteristics of high speed, high precision and so on. It is very suitable for the machining of precision products.
The HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove and structure optimization. It features equal load ratings in the radial, reverse radial and lateral directions, and self-aligning to absorb installation-error. Thus, the HG series linear guideways can achieve a long life with high speed, high accuracy and smooth linear motion.
Chip Conveyor (Optional accessories)
A chip conveyor can be attached for automatic removal of excess chips. Either a screw type or a chain type conveyor can be used.
Best precision protective cover
The CNC lathe cover is used to protect the CNC turning center guide. It can protect the internal hard guide of the CNC lathe, the linear guide and the ball screw or the transmission rack from external corrosion and damage.
Precision Lathe Spindle Belt Driven
TAICNC each spindle has gone through 13 strict steps, four process tests, two dynamic balance tests to ensure that each spindle can play a high-precision operation stability.
Every machine tool produced by TAICNC is produced in strict accordance with the ISO standard. During this process, a variety of quality management tests will be carried out. We must ensure that all the CNC machine tools delivered to our customers are qualified and perfect.
A sophisticated laser unit is employed to inspect the three-axis accuracy.Including linear positioning, positioning, accuracy, pitch error, and backlash, etc.
use a ball bar tester is employed for inspecting servo accuracy, static and dynamic geometric errors.
CNC lathe can do a lot of work this is only part of it, it can process a lot of materials such as copper, aluminum, steel, Bakelite and so on, can be used in various fields, if you are not sure Whether to meet your requirements welcome to contact us.
About packaging and shipping
We use strict packaging for all machine tools to ensure that it will not be damaged during transportation. We have good cooperation with many transportation companies. We must ensure that the machine can be transported safely and on time to your factory.
TAICNC has passed the ISO9001 / 14001 certification and CE certification, obtained a number of national patents, and strictly comply with manufacturing standards.
TAICNC manufacturing factory show
We have a sound management system and a clean factory, which is the first condition to ensure product quality.
|Swing Over Bed||mm||Φ390|
|Max Rotary Diameter on Turret||mm||Φ120|
|Spindle speed Range||r/min||0-4000|
|Gear of Spindle Speeds||-||CV|
|Spindle Motor Power||kw||3.7|
|X/Z Servo Motor Power||kw||0.85|
|Re-Accuracy X Axis||mm||±0.0025|
|Re-Accuracy Z Axis||mm||±0.0025|
|Standard Tool Type||-||Row Knife|
|Max Loading Tools||pcs||4|
|Tool Size O.D||mm||20×20|
|Tool Size I.D||mm||Φ20|
|Power Unit||2 axis power head unit+Y axis|
|Head Motor Power||mm||0.85+0.85|
|Head Clamping Dia||mm||Φ13|
|Max Tap Dia||mm||M8|
|SCK-36CY CNC Lathe Specification List|
|1||CNC SYSTEM||SYNTEC (optional)|
|3||Main Motor||3.7KW Converter Motor (optional)|
|4||Spindle parts||Domestic or Taiwan Posa|
|5||X/Z/Y axis ball screw||X/Z/Y axis ball screw|
|6||X/Z/Y axis linear guide||Taiwan PMI or Hiwin|
|7||Bed base||Cast iron base|
|8||Electrical components||Electrical components|
YEARS OF EXPERIENCE
We have 18 years experience in CNC machine tool production and provide a variety of CNC machine tools.
Has advanced leading production facilities such as the pentahedron gantry machining center and guide rail grinding machines.
Has advanced international coordinate measuring instruments, laser interferometers, ball bar and other high-precision testing equipment.